"We Optimize Resources to Maximize Results"
AUTOMATED MEDICAL OXYGEN PLANT ensures constant supply of oxygen which is crucial for emergency and medical treatment in hospital and clinics, provide life support during pandemic in hospital located at urban and rural areas which are typically far away from cities without proper transportation facilities
Modern plants can be customized to meet space and other limitations thus it can be installed at any location
Integration with control and monitoring system will ensure proper functioning of the entire plant.
Developing and under-developed countries must have O2 plant to tackle diseases spread rapidly in communities hence small clinics and tertiary health centers need small scale O2 plant because of their typical location at least to give life-saving support.
Cylinder filling facility is useful to supply O2 cylinders to nearby laboratories and research institutions and provide sustainable income to maintain the gas generation plant and equipment.
Due to advance medical technologies, plant operation maintenance is simple and user friendly
Availability:In Stock
Availability of adequate oxygen at health care center can be the difference between life and death. The existing capacity of hospitals is far below requirement in developing countries. Lack of transport facilities to the outskirts creates scary situation during critical care treatments. The overwhelming number of patients in need of oxygen therapy far outstrips the existing capacity at hospitals and health facilities. Oxygen is needed at large-scale to serve health facilities with hundreds of patients at a time.
Pressure Swing Absorption (PSA) oxygen plant setup is used to produce large volumes of medical grade oxygen that can be immediately deliver to patients via cylinders which are needed to be refilled as per requirement.
As of now, O2 plants are designed to produce medical oxygen in large volume and then distributed through light pressure (6-10 Bar) pipeline system near to patient via Bed Head Unit, Humidifier and Breathing apparatus. Cylinder filling system is also inter-connected to the pipeline so that these filled cylinders can be used for emergency or transport to nearby hospitals or stores.
We supply complete medical oxygen manufacturing plant from capacity 2 m3/hr to 50 m3/hr compliance with FDA, ISO-13485:2016 and IEC norms and conditions. These Gas plants are automatic units producing gases at low cost. Our Oxygen generators are based on Molecular Sieves PSA process which produces high purity Oxygen. Such Oxygen generators are very commonly being used in Hospitals.
These plants can be standalone, skid mounted or containerized type to suit any space available at premises.
Automated O2 plant ensures constant supply of oxygen which is crucial for emergency and medical treatment in hospital and clinics.
Provide life support during pandemic in hospital located at urban and rural areas which are typically far away from cities without proper transportation facilities
Modern plants can be customized to meet space and other limitations thus it can be installed at any location
Integration with control and monitoring system will ensure proper functioning of the entire plant.
Developing and under-developed countries must have O2 plant to tackle diseases spread rapidly in communities.
Even though small clinics and tertiary health centers need small scale O2 plant because of their typical location at least to give life-saving support.
Cylinder filling facility is useful to supply O2 cylinders to nearby laboratories and research institutions and provide sustainable income to maintain the gas generation plant and equipment.
Due to advance medical technologies, operation maintenance is user friendly
OUR BIO MEDICAL ENGINEERS DO CONDUCT SITE SURVEY AND DISCUSS WITH ALL STAKE HOLDERS TO UNDERSTAND SCOPE OF WORKS WHICH MAY INCLUDE
Automatic plant start-up time is only 5-minutes to start getting Oxygen. Automatic pressure switch on oxygen tank switches OFF & switches ON Oxygen plant automatically as per Oxygen consumption and Oxygen demand. It is fully automatic unit, so no operator required. Maintenance is negligible. Only running machine is Air compressor.
Type: Floor Mounted / Skid Mounted / Containerized system
Capacity: 2.6 – 100 m3/hour or more in array
Cylinder Filling: Manifold with capacity 8 – 50 cylinders at pressure 150-200 bar
Oxygen Purity: 90 – 99%
Air Compressor: Screw type Air compressor with Cyclone separator & Air Filter
Air Dryer: Refrigeration Air Dryer Unit.
Air Receiver: Blue Tank with Gauge, relief Valve, Capacity 1000 – 5000 L with Auto drain valve.
Filter: Multi-stage Primary Air Filter and Secondary Air Filter (HEPA), Oxygen filter with valves, molecular sieves and Activated Alumina,
Bacteria and Dust filter in oxygen line after storage tank.
PSA Oxygen Generator: SLAVE & MASTER units with Oxygen Analyzer and Oxygen flowmeter.
Oxygen Primary Tank: White Tank with Gauge, relief Valve, Capacity 1000 – 5000 L
Oxygen Secondary Tank: White Tank with Gauge, relief Valve, Capacity 500 – 3000 L
Distribution: Supply Manifold with flow valve (piping and connectors additional)
Oxygen Booster: High pressure Booster compressor with capacity 8 – 50 cylinders at pressure 150-200 bar
Back-up Cylinder Filling Manifold: Complete set to fill 8 – 50 cylinder per hour
Process Piping: CS / SS / Copper with Brass / Bronze / SS connectors
Electrical: Cabling and control panel with PLC
Compliance to Standard Medical Device Directive 93/42/CE.